High power LED street lights precautions

1, installation or inspection of led street lamp construction personnel must have electrical professional knowledge qualifications, to prevent the risk of electric shock;

2, it is strongly recommended that you wear gloves when installing work to avoid injury.

3, only the screws provided with the installation, in the case of lost screws, please order the corresponding specification value screws.

4, do not look directly at the luminous LED lighting at close range, so as to avoid light damage to the eyes.

5. Do not loosen the torque setting of any screw inside the machine to ensure the waterproof level. (except lamp pole clamping plate fixing screws)

6. If there is smoke or fire in the wire, please turn off the power immediately and notify the relevant personnel for maintenance.

In order to ensure the best lighting effect, please clean the luminaire regularly (once a year is recommended), clean the luminaire surface with a soft cloth, do not use chemical solvents cleaning, to prevent damage to the surface of the anti-rust anti-corrosion treatment layer. Disconnect the power supply before replacing and maintaining internal parts.

Extended information:

1, high light efficiency, low energy consumption

The traditional street light source generally emits light to the entire space, but the street light needs to illuminate only the road surface of driving and pedestrians, so in the design of street lamps, in order to make the light uniformly and centrally projected on the road surface as much as possible, it is necessary to use a curved reflector to collect light and make it shine in the required direction.

2, long service life

The life of street lamps directly affects the maintenance cost of the entire road lighting. At present, the life of high-pressure sodium lamps is generally about 20,000 hours, the service life of high-pressure sodium lamps for road lighting is only about 5,000 hours, and the life of high-power LED is generally 50,000-70,000 hours.