How are practical park lawn lights installed?

Holidays to the park to play, always see a variety of lawn lights, not very attractive during the day, but at night, you can emit colorful lights, not only good looking, but also practical. So how are these lawn lights buried in the park installed?

1. Installation steps
1. Check whether the lawn light is in good condition;
2. To open the lamp shell, install the light source and supporting electrical appliances;
3. Lead the lead wire through the threading hole to the bottom of the lamp pole, and then link the lamp head to the lamp pole, tighten the fastening screws;
4. Align the lawn lamp flange with the foundation embedment screw and stand vertically;
5. Tighten the screed with nuts or pads.

Second, installation precautions

Step 1: Wiring

A wire not less than the distribution phase wire is used as a ground wire to connect the metal housing of the lamp or lamp post, and the ground wire is connected to the "ground" of the system.

When the length of the ground cable exceeds 25 meters, the end of the ground cable is repeatedly grounded. For repeated grounding, bury a 25m-long galvanized flat iron of 4mmx40mm and lay five grounding poles. The grounding poles are made of 5x50 galvanized Angle steel of 2.5 meters and are vertically driven into the ground.

The ground pole of the lamp pole must be firmly welded, the joint must be lined with tin, and the PE protection wire of the street lamp power supply must be connected to the ground wire of the lamp pole with a spring gasket and then screw on the nut.

Step 2: Spacing

Lamps use 0.5 meters high, 23 watts of energy-saving lamps require spacing of about 11 meters, so that the lighting effect is the best, can save a lot of costs.

The distance between the garden lights is about 25 meters, the lawn lights depend on the specific situation and requirements, and some places around the rockery and pavilion will be installed more