How is the underground lamp connector waterproof?
Leave a message
The main methods of waterproof treatment of buried lamp connector :
Use waterproof power cable : The power cable of the buried lamp must be waterproof power cable certified by VDE to ensure the service life.
waterproof junction box : Use a waterproof junction box when connecting cables, and seal the junction box with glue at the edge or wax inside.
waterproof filling tape and self-adhesive waterproof tape : Wrap waterproof filling tape and self-adhesive waterproof tape at both ends of the cable, and use heat shrink tubes to enhance waterproof resistance when necessary.
sealing rubber ring and stainless steel firmware : Insert the cable through the sealing rubber ring and tighten it with the stainless steel firmware to ensure that the cable does not pull out of the sealing rubber ring.
Detailed steps and materials
Prepare materials :
1.Waterproof power cord
2.Waterproof junction box
3.Sealing rubber ring
4.Stainless steel firmware
5.Self-adhesive waterproof tape
6.Heat shrink tube
Steps :
1.Pass the cable through the sealed rubber ring.
2.Use stainless steel firmware to secure the cable, ensuring that the wire does not pull out of the sealing rubber ring.
3.Connect the cable to the waterproof junction box and apply glue or internal wax to the edge of the junction box.
4.Use self-adhesive waterproof tape and heat shrink tube for enhanced waterproofing.
5.Finally, apply a final wrap with sellotape to ensure tightness.
