How to change the solar lamp battery without model? Here comes the battery change tutorial

First, choose the right battery
Before replacing the solar lamp battery, you first need to buy the appropriate battery. Due to the wide variety of solar lamp batteries, different brand models are different, so you can choose according to the appearance of the battery and voltage and other parameters.

If the solar lamp battery does not have a model, you can remove the battery and ask the after-sales or professional maintenance staff, they will recommend the right battery for you according to the battery appearance, voltage and battery capacity and other parameters.

Second, remove the lamp
Before replacing the solar lamp battery, you first need to remove the lamp. Under normal circumstances, the battery of the solar lamp is installed in the chamber of the lamp, so the lamp needs to be removed in order to replace the battery.

Note: Be sure to turn off the solar lamp before changing the battery to avoid electric shock accidents.

three, Replace the battery
After removing the lamp, you can begin to replace the solar lamp battery.

The steps are as follows:

1. Take out the primary battery: First of all, you need to take out the original solar lamp battery from the chamber, generally by gently unscrewing the battery cover, and then take out the battery.

2. Place the new battery: Place the new battery in the battery cover, and pay attention to the positive and negative directions.

3. Reassemble: Put the new battery in place, cover the cavity again, and fix the lamp cover according to the fixing plate.

4. Test: Test whether the solar lamp can work properly.

Note: When replacing the battery, be sure to pay attention to whether the positive and negative poles of the battery correspond to each other, if improperly installed, it will cause the battery to short circuit or overcharge, thereby damaging the solar lamp circuit board.

Iv. Summary
The above is a detailed tutorial on how to change the solar lamp battery without a model. If your solar lamp battery can not work properly, try to replace the battery according to the above steps, can be a good solution to the problem of solar lamp without electricity. If you are not sure you can operate it yourself, it is recommended to find a professional maintenance personnel to operate it.

Remember that when choosing the battery, choose the corresponding battery according to the brand and model of the solar lamp, so as to avoid voltage mismatch or low battery capacity.