How to install led wall wash light?

led wall wash light is also called LED line light, it is actually a kind of lighting that can let the light flow like water through the wall. led wall wash lamp is composed of a large number of LED lamp beads, mainly used as the lighting and decoration of the building, can also be used to outline the outline of the building. led wall washing lights have high light efficiency, rich color, long life, energy saving and environmental protection, and are generally used outdoors. So how to install led wall wash lights? What are the precautions during installation and use?

 

Installation method of led wall wash light

 

1, the first step will first led lamp beads with tin strip and soldering iron welding on the aluminum substrate, remember to weld must be careful oh!

 

2. After the lamp bead is welded, it should be taken to test the light, and if there is virtual welding or the light is not bright, it should be corrected in time.

 

3, when the test is completed, make sure that the welded lamp bead is no problem, you can play the cooling silicone at the back of the aluminum substrate, and then put the board inside the shell, ready for the next step.

 

4, the above work is the preparation work before installation, after done, you can weld the power supply. The power supply is welded to the positive and negative poles of the aluminum substrate, and after welding, the tape is tied for gluing. When filling glue, the wall wash lamp must be put smoothly, so that there will be no mistakes.

 

5, the tape can be removed on the afternoon or the next day after the completion of gluing, and then glue the glass, and finally install the plug at both ends.

 

6, after the installation of led wall washing light can start wiring. Remember that the cables are inserted into both male and female cables for easy installation.

 

7, after the wiring is completed, the led wall washing light is installed in the position required by the user.

 

Matters needing attention

 

1, led wall washing light is only suitable for installation on the plane.

 

2, installation according to the requirements to determine the installation position, and then according to the specifications of the product to determine the location of the mounting hole, after determining these can be installed.

 

3. When installing on the plane of the concrete structure such as the ground, it is necessary to use a professional punching tool to play the expansion screw according to the size, and then install the mounting seat. If it is a plane of wooden structure, it can be locked directly with screws.

 

4, led wall wash light must be installed after the power trial.

 

5, the installation must be installed and debugging by professional installation personnel. In addition, if the lamp is damaged to be replaced, it can not be installed and used without a protective cover to avoid danger.

 

The above is about the installation method and precautions of led wall washing lamp. The current application range of led wall washing lights has been very wide, such as the lighting of various company buildings, green landscape lighting, medical lighting, karaoke and other entertainment venues atmosphere lighting. Most of the led wall washing lights are used outdoors, so its quality parameters are very important, and special attention should be paid to the purchase, not only to look at the price, but also to examine the quality.