How to use the underground lamp correctly?

Types and characteristics of Stainless Steel led Underground Light

There are three main types of buried lights : LED buried lights, fluorescent buried lights and sodium buried lights, of which LED buried lights are the most common one and the most widely used one. It uses LED as a light source, with low energy consumption, long life, high brightness, good safety and other advantages. Fluorescent underground lamps use fluorescent lamps as a light source, although its brightness is slightly weaker than LED lamps, but the service life of more than 10,000 hours, and the price is more affordable. Sodium lamp buried lamp uses sodium lamp as the light source, which has high brightness, but it wastes a lot of energy and affects the environment.

Installation method of Steel led Underground Light

1. Determine the installation position of the buried light

The installation position of the buried lamp must be determined according to the actual needs, mainly considering the lighting purpose, illumination requirements, visual effects, aesthetic effects, safety and other factors. Before installation, be sure to carry out reasonable planning and design according to the actual situation.

2. Excavate the bottom of the pit

When excavating the bottom of the pit, reasonable excavation should be carried out according to the size and requirements of the buried lamp to ensure that the installation depth of the lamp meets the specifications. The excavation depth should reach the height of the luminaire, and the flatness and perpendicularity of the pit bottom should be controlled.

3. Buried wire tube

Before the lamp installation, it is necessary to install the wire tube first. The connection interface between the wire tube and the lamp should be designed closely to ensure a strong connection.

4. Install lamps

Before installing the lamp, first pull the cable into the wire tube, and then put the lamp into the pit, and then fix it with accessories after alignment adjustment.

5. Protect the lamps

After installing the lamp, it is necessary to carry out protection and waterproof work in time. Mainly adopt artificial reinforcement, the use of sealing rings, the use of professional water plugging agent, etc., to ensure the safety of the lamp and maintenance cycle.

 

Precautions for the use of Steel led Underground Light

1. Pay attention to the water resistance of cable wiring

When installing the cable, the waterproof performance of the cable should be considered, and special cable waterproof tubes and sealing rings should be used to ensure the safety of the line.

2, pay attention to the maintenance cycle of lamps

According to the use of the environment and the quality of the lamp and other factors, the maintenance time of the lamp will vary. It is recommended to check and maintain the buried lamp regularly to ensure the normal operation of the lamp.

3, pay attention to prevent water penetration

When installing the lamps, the selection of qualified sealing materials, the use of professional water plugging agent and other ways to ensure that water penetration, to ensure the normal work of the buried lamp.

4, pay attention to the maintenance of lamps

In the process of normal use, it is necessary to clean up the dust and dirt in the lamp cup in time to ensure the luminous effect of the lamp.