Installation method of wall washing lamp and its application place

Now it is advertised that the city we live in is not only polluted by the air, but also has a new noun, called light pollution. Especially at night, a variety of lights, not only shops, but also a variety of buildings will have the installation of colored lights. In fact, most of the lights we see are called wall washers. So what is its use field and its installation principle? Today, let Xiaobian introduce it to you in detail.

Introduction to the wall washing lamp:

Wall washing lamp, as the name suggests, let the light wash the wall like water, mainly used for building decoration lighting, and used to outline the outline of large buildings, because led has energy-saving, high light efficiency, rich color, long life and other characteristics, so other light source wall washing lamp gradually replaced by LED wall washing lamp. The technical parameters of the LED wall washing lamp are generally similar to those of the LED floodlight.

Installation method of wall washing lamp:

1. First of all, the LED lamp beads are welded on the aluminum substrate with soldering iron and tin strip

2, and then the welded board to try to light, see if there is no virtual welding or not bright situation

3, after the test is completed, put heat dissipation silicone on the back of the aluminum substrate, put the plate into the shell, and carry out the next operation

4, the preparation process is done, the power is welded to the positive and negative poles of the aluminum substrate, and then the two ends are tied with tape for gluing

5, glue washing wall lights must be evenly placed flat, can not put crooked or slanted.

6. The next day or the afternoon after gluing, you can remove the tape and glue to install the glass and then install the two plugs of the wall washing lamp.

7. After the wall washing lamp is installed, the wiring outlet interface is male and female for easy installation

8, the finished lamp can be used after the production of LED wall washing lamp

Application of wall washing lamp:

LED wall washing light through the control of the built-in microchip, in small engineering applications, can be used without controller, can achieve gradual change, jump, color flicker, random flicker, gradual alternating and other dynamic effects, can also be controlled by DMX, chase, scan and other effects. The main application places are: single building, historical architectural complex exterior wall lighting; Inside the building light exterior lighting, indoor local lighting; Green landscape lighting, billboard lighting; Medical, cultural and other special facilities lighting; Bars, dance halls and other entertainment venues atmosphere lighting.

Although this kind of wall washing lamp is relatively good in the visual effect, the general power is relatively large, the irradiation distance is usually within the range of three meters to five meters, and most of them are in government or commercial places. And the color specifications of this wall washing lamp are more common, red, yellow, blue, and even some colorful colors. Because it is equipped with LED tubes, it is also relatively environmentally friendly in terms of electricity saving. Another advantage is that the heat dissipation of this wall washing lamp is better.