Introduction to the difference between high and low pressure lamp belts

Do you know the high voltage lamp belt? High voltage lamp belt is according to the difference in the use of LED lights and different requirements for the lamp belt, and divided into high voltage LED lamp belt and low voltage LED lamp belt two, high voltage LED lamp belt is also known as AC lamp belt, low voltage LED lamp belt is also known as DC lamp belt, they are often used to outline the outline of various buildings, build large lighting patterns, a variety of indoor dark slot decoration, Community, home beautification and other lighting decoration then what is the difference between these two kinds of LED flexible lights? What are the advantages and disadvantages of the two? Today I'm going to tell you a little bit about the difference between the two.

The difference between high and low pressure lamps

1. Safety: The high-pressure LED lamp belt uses 220V voltage, which is a dangerous voltage, and there are security risks in some risk applications; The low voltage LED lamp strip is working under DC 12V, which is a safe voltage and can be applied to various occasions without any danger to the human body.

2. Installation: high voltage LED flexible light belt installation is more convenient, can be directly driven by a high voltage driver, the general factory can be directly configured, purchased back directly installed on the 220V power supply can work normally. The installation of the low-voltage LED flexible light strip should be in front of the light strip to install a DC power supply for voltage reduction, which is relatively complicated during installation.

3. Price: If the price of the two lamp belts is similar, but the overall cost is different, because the high voltage LED lamp belt is equipped with a high voltage power supply, a general power supply can drive 30-50 meters of LED flexible lamp strips, so the cost of the high voltage lamp belt is relatively low. The low voltage LED belt should be equipped with DC power, generally 1 meter 60 beads 5050 light belt power is about 12-14W, which means that each meter of light belt should be equipped with about 15W DC power, so the cost of the low voltage light belt will increase a lot, greatly higher than the high voltage LED light belt. Therefore, from the overall price, the price of the high-voltage lamp belt is cheaper.

4. Packaging: The packaging of high voltage LED lamp belt is generally 50-100 meters/roll; The low-voltage LED lamp belt is generally up to 5-10 meters/roll, so the packaging difference between the two is quite large.

5. Service life: The service life of the low-voltage LED lamp belt is technically 50,000-100,000 hours, and the actual use can also reach 30,000-50,000 hours. High voltage LED lamp belt due to high voltage, the heat per unit length is much more than the low voltage LED lamp belt, which directly affects the life of the high voltage LED lamp belt, generally speaking, the service life of the high voltage LED lamp belt is about 10,000 hours.