Outdoor wall lamp installation method and precautions

Outdoor wall lamp is a kind of wall lamp, we listen to its name also know its role, usually installed on the outdoor wall, can also be installed on the outdoor lamp post wall. Below, I will introduce the installation method and precautions for outdoor wall lamps, and I hope it will be helpful to you.

Outdoor wall lamp installation method and precautions

Outdoor wall light installation method

1, the determination of the installation position of the wall lamp: because the distance determines the effect of lighting, it is necessary to take into account the convenience of installation and maintenance, so in general, the height of the wall lamp needs to be about 2.2 ~ 2.5m from the ground, but if it is on the workbench, it needs to be about 1.5 meters from the working horizontal line. The installation of the bedroom wall lamp only needs to be about 1.5 meters from the ground.

2, lighting preparation: First of all, you need to connect the connection wiring of the wall lamp, using the connection that can be controlled by the switch. After the open wiring, with a pull wire switch, dark wiring, need to choose a hidden key switch. In addition, the switch selection of outdoor wall lamps needs to ensure that the operating organization of the switch is sensitive and light, and can achieve the effect of switching at will instantly.

3, the fixing of the wall lamp: after the location and lighting are determined, the first installation is the work of the wall lamp holder, the first need to use the embedded parts or drilling methods, the lamp holder is fixed, and then install the inner core, fixed on the wall, try to work first, if you can, strengthen the fixed work of the wall lamp.

Outdoor wall lamp installation method and precautions

Outdoor wall lamp installation precautions

1, the wall lamp shade or lamp holder needs to do a good job of sealing work, need to pay attention to waterproof, dust, etc., because the temperature of the wall lamp work is relatively high, the lamp holder and lamp shade and some other original need to use rubber pad or silicone rubber pad, if you do not do these work well, then the stability of the wall lamp is not good, easy to fall off and other phenomena.

2, the installation of the wall lamp process pay attention to, we here here the main consideration of the process is the color of the wall lamp and the color of the light, first of all, the color and electricity of the wall lamp and the installation of the wire color effect contrast, harmonious integration, otherwise it is easy to affect the beauty, if the tone atmosphere is not matched, not only no decorative effect, but also may affect the integrity of the entire decoration.