Solar light first use method

The first use of solar lamps is as follows:

1, first tear off the protective film on the surface of the solar panel to ensure that the surface is clean and tidy.

2, find a position with sufficient sunlight to fix the solar lamp, so as to ensure that the lamp can shine normally.

3, because the first use of solar lamps may not have electricity, so before the formal use, you need to first put in the sun for more than 5 hours. In addition, because the solar lamp should be used in a dark environment, when installing, try to avoid other light sources.

Aspects to consider when installing solar lights

1. Consider whether there is sunlight

Because the solar lamp needs to be illuminated by the sun in order to emit light, when installing the solar lamp, it is necessary to consider whether the installation position can be illuminated by the sun, and the time of sunlight exposure should be as long as possible, so as to ensure that the solar lamp can be used normally.

2, consider the height of the solar lamp

When installing solar lights, it is necessary to determine the work of solar lights according to the use of the environment, under normal circumstances, it is recommended to install more than 144 cm, 185 cm below the position is better, but if it is used in the bedroom, then the position can be appropriately lowered.