Solar street light inductive charging instructions do not flash at night is not bright how?

Solar street light is a kind of lighting equipment that uses solar energy to generate electricity and store electric energy, which has the characteristics of environmental protection and energy saving, and is widely used in urban roads, parks, squares and other places. Solar street lights are usually equipped with sensing devices that can automatically adjust the brightness and switch of the light according to the brightness of the surrounding environment.

If the solar street lamp sensor charging indicator does not flash, the night is not bright, there may be the following reasons:

1. Solar panels blocked: solar street lamp panels need to fully receive sunlight in order to charge. If the panels are blocked by leaves, dust and other objects, the sunlight can not fully shine on the panels, resulting in the battery can not be charged, and then can not supply power to the street lamp.
Solution: Clean up the debris on the panel to ensure that the panel can fully receive sunlight.

2. Battery aging or damage: the battery life of solar street lights is limited, after a period of use, the battery may be aging or damaged, unable to store electricity normally.
Solution: Replace the battery and select a new battery that meets the specifications.

3. Lamp failure: The lamp of the solar street lamp may have a fault, such as the lamp burned out, poor line contact, etc., resulting in the lamp can not work normally.
Solution: Check whether the lamp is faulty, and if necessary, replace the bulb or repair the wiring.

4. Induction device failure: The induction device of the solar street lamp may be faulty and cannot correctly sense the brightness of the surrounding environment, resulting in the inability to automatically adjust the brightness and switch of the light.

Solution: Check whether the induction device is faulty, if necessary, replace the induction device.
In short, the solar street lamp inductive charging indicator does not flash and is not bright at night may be due to the obstruction of the panel, aging or damage of the battery, lamp failure or induction device failure and other reasons. The solution is to clean the panels, replace the batteries, repair the lamps, or replace the sensor. If the above methods can not solve the problem, it is recommended to contact a professional solar street lamp maintenance personnel for maintenance.