What are the advantages of LED light sources?

1. Energy saving and environmental protection

The luminous principle of LED is different from that of incandescent lamps and gas discharge lamps, and the energy conversion efficiency of LED light source is very high, which can theoretically achieve 10% of the energy consumption of incandescent lamps, and LED can also achieve 50% energy-saving effect compared with fluorescent lamps. The LED with a light efficiency of 75lm/W consumes about 80% less power than the incandescent lamp with the same brightness, and the energy-saving effect is remarkable, which is undoubtedly of great significance for China, which is very tight on energy. LED can also be combined with solar cells, energy saving and environmental protection. It does not contain toxic and harmful substances (such as mercury), avoiding the secondary pollution of fluorescent tube leakage of mercury, while there is no interference with radiation. LED light source is not only more environmentally friendly and energy-saving, but also LED light source optical gamut is wider, higher color saturation, more importantly, LED lighting light source service life of up to 60,000 hours, can completely solve the problem of short life of traditional light source.

2, long life
Under normal circumstances, LED light decay can be reduced to 70% of the nominal life of 100,000 hours, reducing the frequency of replacement and other maintenance work.

3, pure light color
Because the typical LED's spectral range is relatively narrow, it does not have a full spectrum like incandescent lamps. Therefore, LED can be freely diversified combination, especially suitable for decoration and other aspects. Bright saturated, pure, no filter, red, green and blue elements can be adjusted into a variety of different colors, can achieve changeable, progressive, mixed light effect, excellent color effect. It can realize continuous brightness adjustment, high color purity, and dynamic color transformation and digital control.

4, moisture-proof, vibration resistance
Because the exterior of the LED is mostly protected by epoxy resin, the sealing performance and impact resistance are very good, and it is not easy to damage. It can be applied to underwater lighting.

5. Flexible dimensions:
It can realize the organic integration with the building to achieve the effect of seeing the light and not the lamp.

 

6, environmental protection:
No harmful metallic mercury, no infrared and ultraviolet radiation. High power LED characteristics and compared with other light sources LED is called "green light source" deserved.

 

7. Be varied
LED light source can use the principle of red, green and blue three primary colors, under the control of computer technology to make the three colors have 256 gray levels and arbitrary mixing, that is, 256×256×256=16777216 colors, forming a combination of different light colors, to achieve rich and colorful dynamic change effects and various images.

 

8. Advanced technology
Compared with the monotonous luminous effect of traditional light sources, LED light sources are low-voltage microelectronics products. It successfully integrates computer technology, network communication technology, image processing technology, embedded control technology, etc., so it is also a digital information product, is a semiconductor optoelectronic device "high-tech" technology, with online programming, unlimited upgrade, flexible and changeable characteristics.

 

 Other advantages:

 

Low heat, miniaturization, short response time, etc., all of which make LED light sources have great advantages, creating favorable conditions for application in actual production and life.

 

1, high efficiency and energy saving 1000 hours only consume a few hours of electricity (ordinary 60W incandescent lamp consumes 1 hour of electricity in 17 hours, ordinary 10W energy-saving lamp consumes 1 hour of electricity in 100 hours).

 

2, ultra-long life semiconductor chip light, no filament, no glass bubble, not afraid of vibration, not easy to break, the service life of up to 50,000 hours (ordinary incandescent lamp service life is only 1,000 hours, ordinary energy-saving lamp service life is only 8,000 hours).

3, light healthy light does not contain ultraviolet and infrared, does not produce radiation (ordinary light line contains ultraviolet and infrared).

 

4, green environmental protection does not contain harmful elements such as mercury and xenon, which is conducive to recycling and does not produce electromagnetic interference (ordinary lamps contain elements such as mercury and lead, and electronic ballasts in energy-saving lamps will produce electromagnetic interference).

 

5, protect eyesight DC drive, no stroboscopic (ordinary lights are AC drive, it will inevitably produce stroboscopic).

 

6, the light efficiency is high and the heat is small, 90% of the electricity is converted into visible light (ordinary incandescent lamp 80% of the electricity is converted into heat, only 20% of the electricity is converted into light energy).

7, the safety factor is high, the required voltage, current is small, the heat is small, does not produce safety risks, in the mine and other dangerous places.

8, the market potential of low voltage, AC power supply, battery, solar power supply, in remote mountainous areas and field lighting and other lack of electricity, less electricity places.