What is the installation method of starry sky fiber optic light?

The installation method of starry fiber optic light is as follows:

1. Prepare the required tools and materials, including 220V power cable, diagonal three-eye 10A socket panel, keel with a height of more than 8CM, optical fiber, controller, etc.

2. Reserve a height of 10CM above the ceiling, and cut holes on the ceiling directly above the center of each set of lights. Use 8-10CM self-tapping screws to secure the chassis to the board ceiling.

3, after the completion of the ground installation, the corresponding gypsum board installation is fixed on the ceiling keel. After the gypsum board is installed, patch the joints of the gypsum board and spray paint or paint according to the requirements. When the paint or paint is dry, cut the excess fiber flat.

4, the light source generation and control system is installed on the ceiling, choose a ventilated, dry and easy to maintain position. The ceiling is completely enclosed and manholes should be provided in appropriate locations to facilitate the placement and maintenance of controls.

5. Connect the 220V power cord to the controller, and connect the controller to the light source generator. Make sure the connection is correct and secure.

6. Complete the installation and carry out functional testing to ensure that the optical fiber light works normally.