How To Adjust The Time Of Solar Street Lights?

The time adjustment of solar street lights can be carried out by the following steps:

Find the time adjustment button on the controller. Usually, the solar street light controller will have a button or knob labeled "TIME" or "time".

Press or rotate the time adjustment button to enter the time adjustment mode. Some controllers may need to hold down the time adjustment button for a few seconds to enter the time adjustment mode.

Once in time adjustment mode, the controller's display displays the current time setting. The time can be adjusted using increasing or decreasing buttons or knobs as needed.

When adjusting the time, note that hour and minute Settings may appear on the controller's display. The hours and minutes can be adjusted as needed.

After adjusting the time, press the confirm button or knob to save the Settings and exit the time adjustment mode.

Check whether the brightness and switching time of the street lamp meet the expectations. If you need to make further adjustments, you can repeat the above steps.

It should be noted that different brands and models of solar street light controllers may have different modes of operation and adjustment methods. In short, to adjust the time of the solar street light controller, you need to find the time adjustment button, enter the time adjustment mode, adjust the time, save the Settings and exit the time adjustment mode. With these steps, the time of the solar street light controller can be easily adjusted.